1.800.833.7958
► Español
►中文
Pneumatic pumps are used in pump & treat applications, particularly at sites where providing electrical service is problematic, combustible vapors are present, or excessive drawdown might damage electric submersible pumps.
Total-fluids pumps pump all fluids from the well, floating product, water, and/or DNAPL. Pneumatic pumps are ideal in low-capacity applications because they can safely run dry without danger of burning out. Pump selection depends on the desired pumping rate, well yield, and the total hydraulic head lift required. Site designers should consult performance curves and data provided by pump manufacturers.
Let Geotech remediation pump experts help you configure the best pump for your site conditions and goals.
Geotech AR4 4" Auto-Reclaimer
The AR4 4" Auto-Reclaimer is designed to pump floating hydrocarbons, leachate, condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines. |
Geotech 1.66 Reclaimer
The Reclaimer System is a positive air displacement pump designed for hydrocarbon recovery, leachate, and condensate in total fluids applications. The pumps are designed to withstand aggressive down-well environments, and highly corrosive fluids without material breakdown or failure. |
Geotech 3.5 Reclaimer
The Reclaimer System is a positive air displacement pump designed for hydrocarbon recovery, leachate, condensate and total fluids applications. The pumps are designed to withstand aggressive down-well environments, and highly corrosive fluids without material breakdown or failure. |
|||||
Geotech Guzzler for Total FluidsThe Geotech Guzzler Total Fluids System is a compact total fluids pumping system designed for shallow well and sump applications with up to 25 ft. (7.6 m) of suction lift. The dual diaphragm pump will provide from 0-4 gpm (0-15 LPM) using from 2-6 cfm (.06-.17 cmm) of air, depending on the suction lift, pumping rate and total discharge head. |
Reciprocating (Piston) Air CompressorGeotech offers an oil lubricated, two stage, tank-mounted, reciprocating (piston) air compressor to provide positive air pressure for powering pneumatic equipment for intermittent use applications. Contact Geotech for proper sizing of systems to meet your air flow and air pressure requirements.
Call 1.800.833.7958 Reciprocating Air Compressor Specifications |