Grundfos pump types
| AP35B | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| AP50B | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| CMBASIS | EndSuction close coupled multistage | |
| CMBSP | Booster set | |
| CMEBASIS | EndSuction close coupled multistage | |
| CMSP0 | EndSuction close coupled multistage | |
| CR001S | Inline multi stage | |
| CR005 | Inline multi stage | |
| CR015 | Inline multi stage | |
| CR020 | Inline multi stage | |
| CRE01 | Inline multi stage | |
| CRE03 | Inline multi stage | |
| CRE05 | Inline multi stage | |
| CRE10 | Inline multi stage | |
| CRE120 | Inline multi stage | |
| CRE15 | Inline multi stage | |
| CRE150 | Inline multi stage | |
| CRE20 | Inline multi stage | |
| CRE32 | Inline multi stage | |
| CRE45 | Inline multi stage | |
| CRE64 | Inline multi stage | |
| CRE90 | Inline multi stage | |
| CRFAM | Inline multi stage | |
| CRI01 | Inline multi stage | |
| CRI03 | Inline multi stage | |
| CRI05 | Inline multi stage | |
| CRI10 | Inline multi stage | |
| CRI15 | Inline multi stage | |
| CRI1S | Inline multi stage | |
| CRI20 | Inline multi stage | |
| CRIE01 | Inline multi stage | |
| CRIE03 | Inline multi stage | |
| CRIE05 | Inline multi stage | |
| CRIE10 | Inline multi stage | |
| CRIE15 | Inline multi stage | |
| CRIE20 | Inline multi stage | |
| CRK02 | The pump part is immersed in the pumped liquid whereas the motor is kept dry by a separating wall or plate. | |
| CRK04 | The pump part is immersed in the pumped liquid whereas the motor is kept dry by a separating wall or plate. | |
| CRN01 | Inline multi stage | |
| CRN03 | Inline multi stage | |
| CRN05 | Inline multi stage | |
| CRN10 | Inline multi stage | |
| CRN10SF | Inline multi stage | |
| CRN120 | Inline multi stage | |
| CRN15 | Inline multi stage | |
| CRN150 | Inline multi stage | |
| CRN15SF | Inline multi stage | |
| CRN1S | Inline multi stage | |
| CRN20 | Inline multi stage | |
| CRN32 | Inline multi stage | |
| CRN45 | Inline multi stage | |
| CRN64 | Inline multi stage | |
| CRN90 | Inline multi stage | |
| CRNE01 | Inline multi stage | |
| CRNE03 | Inline multi stage | |
| CRNE05 | Inline multi stage | |
| CRNE10 | Inline multi stage | |
| CRNE120 | Inline multi stage | |
| CRNE15 | Inline multi stage | |
| CRNE150 | Inline multi stage | |
| CRNE20 | Inline multi stage | |
| CRNE32 | Inline multi stage | |
| CRNE45 | Inline multi stage | |
| CRNE64 | Inline multi stage | |
| CRNE90 | Inline multi stage | |
| CRT02 | Inline multi stage | |
| CRT04 | Inline multi stage | |
| CRT08 | Inline multi stage | |
| CRT16 | Inline multi stage | |
| CU200 | ||
| CU301 | ||
| DDAFAM | Dosing pumps high-end solution for complex and demanding applications | |
| DDCFAM | Dosing pumps optimal price-performance ratio | |
| DDEFAM | Dosing pumps a cost-effective Digital Dosing™ solution | |
| DPFAM | ||
| DPK000 | ||
| DW000 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| DWK000 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| EFFAM | ||
| IO100 | ||
| JP000 | EndSuction close coupled single stage | |
| JPB50 | Booster set | |
| LIFTACC | ||
| MAGNA1 | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| MAGNA1D | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| MAGNA1N | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| MAGNA3 | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| MAGNA3D | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| MAGNA3N | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| MMS06 | ||
| MMS08 | ||
| MQFAM | ||
| MS300 | ||
| MTB000 | The liquid runs directly into the impeller. Inlet and outlet have a 90° angle. The pump is used for machine tool purposes. | |
| MULDOUB | Lifting stations | |
| MULSING | Lifting stations | |
| NB000 | EndSuction close coupled single stage | |
| NBE00 | EndSuction close coupled single stage | |
| NKBASIS | The liquid runs directly into the impeller. Inlet and outlet have a 90° angle. The pump is connected to the motor by means of a flexible coupling. Motor and pump have separate bearing constructions. | |
| NKEBASIS | The liquid runs directly into the impeller. Inlet and outlet have a 90° angle. The pump is connected to the motor by means of a flexible coupling. Motor and pump have separate bearing constructions. | |
| PIPECON | ||
| RMQFAM | ||
| SCALA | ||
| SE100 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SEGFAM | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SESLFAM | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SEV00 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SL1000 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SLV000 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SPFAM | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SPNE03 | ||
| SPNE05 | ||
| SPNE09 | ||
| SPNE17 | ||
| SQC01 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQC02 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQC03 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQC05 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQC07 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQEC01 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQEC02 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQEC03 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQEC05 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQEC07 | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SQFFAM | The pump has a hermetically sealed motor, close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. | |
| SUBFAM | ||
| TP000 | Inline single stage | |
| TPB00 | Inline single stage | |
| TPD00 | Inline single stage | |
| TPE00 | Inline single stage | |
| TPE0S2 | Inline single stage | |
| TPE3NI | Inline single stage | |
| TPE3SI | Inline single stage | |
| TPED0 | Inline single stage | |
| TPEDS2 | Inline single stage | |
| UPA000 | ||
| UPS200 | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| UPSB1 | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. | |
| UPSB2 | Pump and motor form an integral unit without shaft seal. The pumped liquid cools and lubricates the motor and rotating parts. |
|
Lenntech (European Head Office)
Distributieweg 3
2645 EG Delfgauw
The Netherlands
Phone: +31 152 610 900
fax: +31 152 616 289
e-mail: [email protected]
Lenntech USA LLC (Americas)
5975 Sunset Drive
South Miami, FL 33143
USA
Phone: +1 877 453 8095
e-mail: [email protected]
Lenntech DMCC (Middle East)
Level 5 - OFFICE #8-One JLT Tower
Jumeirah Lake Towers
Dubai - U.A.E.
Phone: +971 4 429 5853
e-mail: [email protected]
Copyright © 1998-2021 Lenntech B.V. All rights reserved