Aeromotive Diesel Lift Pump – It’s Here

Aeromotive has announced their direct move into the diesel lift pump market with this latest product. After years of market research and testing, Aeromotive has a pump that will outlast and out-perform the competition. Forget everything you knew about diesel lift pumps – Aeromotive has changed the game.

The Aeromotive diesel lift pump has the flow to fuel the most aggressive street diesels. This is our first pump directly aimed at the diesel market but we are no strangers to it. Performance diesel enthusiasts have been using Aeromotive’s inline and t-style pumps for decades. This Diesel lift pump is available as both a pump only situation, or in vehicle specific kit form. We are starting with pumps for the ever-popular 01-10 Chevy Duramax AND 08-10 Powerstroke.

 

 

The Aeromotive diesel lift pump was developed to solve some key issues in the diesel lift pump market, most notably the ¼ tank issue, the pressure control issue, and motor shaft seal failures. Aeromotive opted for a flow-thru design to solve the shaft seal failure, which means there is no shaft seal to fail or leak. Specific to the Duramax platform is a “fail safe” valve. In the event of failure or a no-run condition, the valve will open and allow fuel to bypass the pump. This allows the vehicle to continue to run and get you to your destination, eliminating tow bills. With a brushless motor design, Aeromotive has increased the performance and longevity you would expect from a diesel lift pump. A single filter model simplifies the design and reduces maintenance cost. Our diesel pump includes the Caterpillar 1R-0750 2-micron filter to catch the smallest particulates. With a standard 1”-14 filter head thread, the end user can use their filter of choice.

ORDER NOW – AEROMOTIVE PART #’s
11801 – Complete Kit, 01-10 Chevy Duramax (130gph @ 10psi)
11807 – Complete Kit, 08-10 Ford Powerstroke (130gph @ 10psi)

11808 – Complete Kit, 03-07 Ford Powerstroke
11802 – A1000 Diesel Lift Pump only (130gph @ 10psi)

11806 – Eliminator Diesel Lift Pump (230gph @ 10psi)
11803 – 01-10 Chevy Duramax, Retro fit kit for exsisting Diesel lift pump, ½” lines
11804 – Hose & Wiring Kit
11805 – Baffled dip tube assembly

 

Shawn Pearcy’s 2004.5 LLY powered Chevy Duramax.  Truck is stock with tune only.  It laid down 461hp and 911 fttq on the chassis dyno.  It was then driven into the shop where it got an Aeromotive part #11801 installed.  This was the only modification done to the truck before it went back on the dyno.  Same day, same truck and same dyno.  The only difference was adding the Aeromotive fuel pump.  The truck put down an impressive 488hp and 1002 lbtq!  Not bad for 5 hours worth of work!