WARMAN® CENTRIFUGAL SLURRY PUMPS
WBH® pump is the world’s new standard for heavy duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The WBH® pump is designed to provide excellent wear life while maintaining efficiency through ‘one point adjustment’ during the wear cycle for the best total operating cost.
- The ‘One Point’ front liner adjustment feature allows an operator to both rotate and axially move the liner to minimise front impeller gap to reduce wear and maintain performance
- Adjustment can be made while pump is running so no need to stop production. Wear components are designed and optimised using state of the art Computational Fluid Dynamics methods
- Large capacity bearings which can withstand high loads including thrust while still providing long bearing life
- Commercial labyrinth-style bearing end cover seals
- Streamlined impeller and volute design flow paths that combine high efficiency and long life
- Enhanced performance impeller and liner
- High pressure rating with metal and rubber liners
- Encapsulated rubber liners for longer life and to prevent liner extrusion or blow-out
- Large diameter Warman® Hi-Seal® expeller for sealing at high intake pressures
- Improved ease of maintenance and longer maintenance intervals
|
Design standards |
Hydraulic Institute 6, ISO 9001, ISO 14001, OHSAS 18001 & CE certified |
|
Design ratings |
N/A |
|
Size range/-dimensions |
Dishcarge size 1” to 12” (25 mm to 300 mm) |
|
Pressure class/-power |
Pressure to 30 psi (2,100 kPa) (metal-lined) |
|
Temperature range |
1-100°C |
|
Capacity |
Capacities to 13,200 gpm (3,000 m3/hr) |
- Mill discharge
- Process pumps
- Low pressure tailings